Embedded touch panel industrial panel machine tool control capabilities
In the advancement of industrial automation, embedded touchscreen industrial tablets have emerged as key equipment in the industrial control sector, distinguishing themselves with their powerful computing capabilities and diverse control functions. These tablets utilize Intel Core U series processors, with options ranging from the 2nd to the 13th generations, including the i3-2310M, i7-3520M, and i5-1340P. These powerful processors can smoothly run complex industrial control software, rapidly process equipment operating data, and ensure efficient and stable production processes. For example, in machine tool control scenarios, they can receive real-time spindle speed, feed rate, and other parameters for precise part cutting and polishing, rapidly calculating and adjusting tool paths to ensure that part machining accuracy meets standards.
Specifications
|
Screen |
touchscreen |
Default full-plane 10-point capacitive touch screen, optional 5-wire resistive touch screen |
|
size |
Screen size |
7-inch, 8-inch, 10.1-inch, 10.4-inch, 12.1-inch, 13.3-inch, 15-inch, 15.6-inch, 17-inch, 18.5-inch, 19-inch, 21.5-inch, 23.8-inch 4:3, 16:9 ratio display |
|
Screen Display |
Resolution |
640×480,800×600,1024×600,1024×768,1280×800,1280×1024,1920×1080, 1920×1200 |
|
Screen temperature |
Operating temperature |
0~50℃,-10~60℃,-20~60℃,-20~65℃,-20~70℃,-20~80℃,-30~70℃, -30~80℃,-30~85℃ |
|
brightness |
Screen brightness |
250/300/350/400/450/500/600/800/1000 nits |
|
Installation |
Embedded |
Support embedded panel installation (opening size other than standard products can be adjusted according to user needs) |
|
processor |
CPU |
CORE-U series I3/I5/I7 2~13 generation I3-2310M/I7-3520M/I5-4200M/I5-5300U/I3-6100U/I5-7200U/I7-8565U/I3-10110U/I5-1135G7/I5-1240P/I5-1340P CPU optional |
|
Chipset |
Intel® SOC |
|
|
BIOS |
AMI 32Mbit,Support diskless boot, network wake-up, power-on boot, watchdog and other functions |
|
|
Memory |
capacity |
1×DDR4 SO-DIMM 2666Memory, maximum capacity 32GB, 1×DDR3 SO-DIMM 1600 Memory, maximum capacity 8GB |
|
storage |
SATA interface NVMe |
1×m.22280 SATA/NVMe SSD Solid state drive slot, optional 1×2.5-inch hard drive slot |
|
Protection level |
IP66 |
By adding the glue dispensing process, the front panel is dustproof and waterproof, and the protection level reaches the reliable IP66 |
|
show |
Chipset Output |
Provides HDMI external display interface, IntelHD Graphics display core, supports external display to expand the screen, and supports synchronous or asynchronous touch operation |
|
network |
Chip WIFI |
Three Gigabit network cards, board edge interfaces Intel i219LM, Intel i210AT, built-in Realtek8111H, in the form of sockets, all support network wake-up and PXE diskless boot functions, and multiple network ports can be expanded as needed |
|
Expansion slots |
Slots |
1xm.22230 E-Key, supports WIFI module, 1xm.23052B-Key, supports 4G/5G module, etc., supports 3.3V/4.0V power supply voltage switching. With SIM card slot, provides 2×3pin socket for external SIM card signal. 1×m.2 M-Key 2280 SATA/NVMeX4 socket on the board supports both SSD and computing power |
|
I/O |
USB COM port DC JACK Audio |
Default 4×USB3.2/3.0/2.0, more USB2.0 can be expanded according to needs Default 2xCOM, optional RS232/422/485 mode, BIOS switch, COM interface can be expanded according to needs 1 × DC JACK Integrated Realtek ALC897 HD digital audio decoder/Line-out, MIC-in, built-in 8Ω2W speaker |
|
GPIO interface |
GPIO |
Up to 16 GPIOs are available. Standard GPIOs can be directly output from the motherboard. Optocoupler isolation and rugged GPIOs are available. DI supports dry contacts and wet contacts, bidirectional optocoupler isolation, and input voltage supports 9-80V wide voltage. NPN and PNP modes are available. DI is used to filter out interference, and does not work below 5V. DO is optocoupler isolated and amplified by OC gate. The maximum output current can reach 500mA. The output voltage depends on the external power supply.. |
|
terminal |
Terminal Blocks |
IO The panel has a 3.5mm 2×2pin locking terminal block, which can be predefined before leaving the factory. The default settings are Remote SW and Power Led |
|
power supply |
Input Rated power consumption |
Lockable DC 9-36V wide voltage power supply interface, providing DCJACK round and 2pin 5.08mm wiring type 2 power terminals to choose from |
|
Watchdog |
Output Interval |
Interrupt, system restart 255 level timer interval |
|
environment |
Temperature Humidity |
Operating temperature: 0°C ~50°C Storage temperature: -20~70°C 5%~90% non-condensing |
|
operating system |
Version |
Windows 10/11/various versions of Linux/domestic system Tongxin Kylin, etc. |
|
Fanless |
design |
The machine body is closed and relies on the aluminum die-casting body to dissipate heat, eliminating the hidden dangers of malfunction caused by traditional built-in cooling fans and dust entering the machine. |
|
Physical Dimensions |
15-inch tablet |
371.4mm (L) x 297.7mm (W)x 60mm(H) |
Ordering Information
|
Sales Model |
Configuration |
|
AOS-SPHMF82S83J |
CPU：I5-4200M Screen: 8 inches Memory: 8G Storage: 256G SSD |
|
AOS-SPWUJ82S23J |
CPU：I7-8565U Screen: 12.1 inches Memory: 8G Storage: 256G SSD |
|
AOS-SPTUF82S73J |
CPU：I5-1135G7 Screen: 17 inches Memory: 8G Storage: 256G SSD |
|
AOS-SPAUF82S33J |
CPU：I5-1340P Screen: 23.8 inches Memory: 8G Storage: 256G SSD |
Application Areas
Applicable to education, restaurants, hotels, shopping malls, company meetings, government affairs disclosure and other fields.
Hot Tags: embedded touch industrial tablet computer, China, suppliers, manufacturers, factory, customized, wholesale
